| Davistown Museum Inventory of Tools - Maritime III | Watchmakers and Jewelers Tools |
| | Status | Location |
| 3405T4 | Drawplate | DTM |
| Steel, 3 13/16" long tapering to 15/16" wide, signed "MARTIN", "FITA", "GARANITIE", "36", "L" and numbered 0 - 14 including |
| four zero sizes. |
| Fourteen is the smallest diameter mark. This is an interesting example of an early 19th century French jeweler's drawplate. |
| 32502T9 | Etching and scribing tools (5) | bio | BDTM |
| Wood handles, 3 rosewood, 2 unknown tropical wood with brass ferrules, 4 1/2" to 6" long, unsigned. |
| One has a steel file and one a diamond cutter with a diamond tip. The other three have steel, brass or iron tips. |
| 32502T12 | Float | bio | BDTM |
| Cast steel, 3" long with 1" float surface, unsigned. |
| The long end is a fine filing surface. |
| 32502T24 | Hand spindles (3) | bio | BDTM |
| Cast steel, brass and wood, 5 1/16", 4 3/4" and 3 3/8" long, unsigned. |
| 32502T25 | Jeweler's anvils (2) | bio | BDTM |
| Bronze, 3 11/32" long, 3/4" wide and 3 3/8" long, 5/8" wide, unsigned, age unknown. |
| One is more highly finished than the other. |
| 32502T4 | Jeweler's files | bio | BDTM |
| Cast steel, etc., various lengths, signatures: "R M Cock" "Grobet" (2) Friely" "Graves & Sons" "W Greaves" "Lord & Co." |
| "Triumph Smart & Child Co." "J. M. Martin" (2) "P. Ashton" (2) "Martin CS" "RS Sanders" (2) "Spanale" "RAINE". |
| 32502T2 | Jeweler's files (30) | bio | BDTM |
| Cast steel, iron, etc., 3" to 6" long, unmarked or with obscure marks. |
| 32502T3 | Jeweler's files (7) | bio | BDTM |
| Cast steel, etc., 3 1/4" to 6 3/4" long, signed "Stubs". |
| 32502T18 | Ladle | bio | BDTM |
| Cast iron, bronze and wood, 6" long, unsigned. |
| 32502T47 | Ring | bio | BDTM |
| Wood, 11 7/8" long, 3/4" maximum diameter at head of taper, unsigned. |
| Used for measuring _______ |
| 32502T22 | Scale level | bio | BDTM |
| Brass, 3 1/4" long, 1 1/16" wide, marked "1 - 18" and initialed "PR" (by the owner). |
| 32502T21 | Scale level | bio | BDTM |
| Brass, 5 3/4" long, tapered, marked "1 - 32". |
| 32502T23 | Scale level | bio | BDTM |
| Brass, 5 5/8" long, 13/16" wide, signed "Sussfeld Lousch & Co New York", "Lepine", "Lever" with scale 000 to 30 and 1 - 27. |
| 111001T6 | Screw plate | bio | DTM |
| Cast steel, 9" long, signed "P.S. Stubs" and marked "19". |
| Used by jewelers and watchmakers for threading fine brass and steel wire to make screws. |
| 32502T42 | Screwdriver | bio | BDTM |
| Brass, 3 15/16" long, unsigned. |
| 32502T20 | Width and depth gauges (set of 8) | bio | BDTM |
| Brass, the marks don't match the apparent sizes, marked "1/4", "1/8" and "1". |
| 32502T41 | Wrenches (2) | bio | BDTM |
| Cast steel, unsigned. |
| Woodworking Tools |
| TAB3000 | Carving mallet | DTM |
| Maple, 10" high, 5 1/2" diameter, unsigned. |
| TCR3000 | Saw set | DTM |
| Forged iron, 5 1/8" long, 1 5/16" wide, signed "BORUEAU PARIS". |
| | Page 39 of 40 |