| Davistown Museum Inventory of Tools - Maritime III | Shipwrights' and Mariners' Tools |
| | Status | Location |
| TCV1005 | Shuttles | DTM |
| Wood, 1' long, unsigned. |
| Used in net or sail making. |
| Silversmithing Tools |
| TJG3000 | Jeweler's hammer | DTM |
| Cast steel and wood, 9 1/4" long including the handle, 2 3/16" long head with a 5/8" diameter face, obscure signature. |
| TST3000 | Jeweler's wire snips | bio | DTM |
| Cast steel and iron, 5 3/8" long, signed "P S STUBS". |
| Another of Stubs finely made imported tools. |
| 41801T11 | Tongs | DTM |
| Forged iron, 16 1/4" long, jaws are 1 5/8" long, 7/32" wide, unsigned. |
| The smallest, most delicate pair of whitesmith's or jeweler's tongs in the Museum collection. |
| Tools Made from Recycled Farriers' Rasps or Files |
| 913108T7 | Blacksmith tongs | DTM |
| Reforged iron rasp or file, 13" long, unsigned. |
| 913108T37 | Blacksmith tools (5) | DTM |
| Reforged steel rasps and files, A) 2 1/2"; B) 9 1/4"; C) 6 1/2"; D) 1 3/4"; E) 7 3/4", unsigned. |
| This is a set of tools a blacksmith may have made for his own use. They consist of: B) grafting tool, C) spud, D) wedge, and |
| two farriers' hoof cutters A) and E). |
| TG1006 | Brick chisel | DTM |
| Reforged steel, 5 3/4" long, 1 1/2" wide, unsigned. |
| No handle. |
| TG1003 | Center punch | DTM |
| Forged steel, 3 1/2" wide, unsigned. |
| TCC1008 | Chisel | bio | DTM |
| Cast or forged steel, 4 1/8" long, 3/4" wide, signed "Stubs". |
| Made from one of Stub's recycled files. |
| 913108T15 | Crooked knife | DTM |
| Recycled file blade, copper wire, and wood, 8 1/2" long, 3/4" long blade, unsigned. |
| This is typical of the forge welded crooked knife used by the settlers of North America for basketmaking and other uses. |
| 913108T23 | Drawknife | DTM |
| Recycled steel file, wood handle, 12" long, 7 3/4" long blade, unsigned. |
| TG1004 | Drawshave | DTM |
| Cast steel?, 13 5/8" long, 9 1/2" blades, unsigned. |
| No handles. |
| 913108T37A | Food chopper | DTM |
| Recycled file, forged iron, and wooden handle, 6 1/2" long, 7 3/8" wide blade, unsigned. |
| TG1009 | Knife | DTM |
| Forged steel and wood, 9 1/2" long, 3 3/8" handle, unsigned. |
| 9 1/2" long. |
| TG1010 | Punch | DTM |
| Forged iron, 5 1/4" long, unsigned. |
| TG1007 | Tack pry | DTM |
| Forged iron, 11 3/8" long, unsigned. |
| Made from a file. |
| | Page 38 of 42 |